-
-
-
-
Honor
-
-
-
-
-
Contact
-
Use, Maintenance and Common Trouble Handling of Excavation Type Transfer Machine
Release time:
2023-01-03
Author:
Source:
Use, Maintenance and Common Trouble Handling of Excavation Type Transfer Machine
Use of (I) Excavation Type Reloading Machine
(1) Before the equipment is started/started, it must be ensured that no one can be injured by the work of the equipment.Pay attention to the indicator light, start and close must be carried out according to the instruction manual.
(2) When the excavator loader is working, never do anything that is safe and dangerous.When the carrier is moving and working, the operator is not allowed to leave the cab or chat with others.
(3) The work area must be fully illuminated. All protective and safety devices are functioning effectively,The equipment can only be operated; when there are people within the working range, the equipment cannot be operated.
(4) The operation and use of the equipment is only allowed under the premise of continuously ensuring the stability of the equipment.
(5) The backhoe loader can only be used when all safety measures, equipment and functions are complete.can be used. In the case of no personnel staying in the dangerous area where the backhoe loader works, it is possible to drive fromChamber operation starts the backhoe loader and can only be operated from the cab. Similarly, working bodies and transport troughsBefore working, no personnel can stay in the dangerous area where the backhoe loader works.
(6) The parts of the equipment may be very hot during operation. Do not touch any hot parts, it mayCauses burns. Body parts and open clothing are not allowed to touch moving parts and rotating parts, otherwise it will causeSerious fatal injuries.
(7) When the equipment fails, it must be stopped immediately and protective measures must be taken to avoid unintentional orUnauthorized activation. Only when all faults are professionally eliminated can the equipment be started again.
(8) No one is allowed to stay in the dangerous area of the equipment. The danger zone here refers to the excavation type.Around the loader, the position that can be reached by the working device of the backhoe loader and the backhoe loader, the backhoeThe position that can be reached by the left and right swing and up and down movement of the working device of the loader, the conveying trough of the excavator loaderThe position where the material and the object can be dropped.
(9) When no one stays in the dangerous area, the equipment operator can carry out the operation. In case of personal injuryIn case of danger, the equipment operator must give a warning signal. If the person concerned has not left the danger after the warningarea, the operator must stop operating the equipment.
(10) When the excavator loader moves, it must keep a certain distance from the obstacle.
Maintenance and Common Fault Treatment of (II) Excavation Transfer Machine
(1) During maintenance and troubleshooting, confirm that the working arm has been retracted and the excavator loaderTo be parked on a level of stable ground, can not be tilted placed to prevent rolling, causing the device to turn overand even lead to serious fatal injuries.
(2) Before the maintenance work starts, the operator shall be notified to determine a supervisor. To press the timeLine repair and maintenance work, repair and maintenance of the excavator loader site to be large enough.
(3) Only when the backhoe loader is parked on a level solid ground. And there are prevent rollThe maintenance work can only be carried out under the premise of dynamic measures. To ensure that equipment during maintenance work does not occurAllowed to start, put a warning sign at the main switch of the backhoe loader.
(4) Only suitable tools and equipment shall be used in the repair and maintenance work.
(5) When maintaining the parts preloaded by the spring force, the spring pressure must be released first, andTake safety measures to prevent possible movement.
(6) When cleaning the bucket, never use a hammer to hit the bucket, otherwise it will cause damage to the bucket teethBad. Before cleaning with water or steam flow, all openings in the machine must be covered or sealed to preventWater, steam and cleaning agents invade the inside of the machine, and the electronic device must never contact water or steam.
(7) with detergent to remove oil, must ensure that there is enough fresh air supply, some washingThe agent can produce vapors that are harmful to health.
Key words:
