-
-
-
-
Honor
-
-
-
-
-
Contact
-
About the installation and removal of the drill bit
Release time:
2018-09-07
Author:
Source:
The drill bit looks small, but its installation and use are still very exquisite. Familiar with it all know. Let's see what it's worth. First is the installation of the drill bit. Slowly lift the drill box, put the four legs of the drill box into the four holes of the drill rotary table, select the corresponding drill box core plate according to the specifications of the drill bit, lift the drill box core plate into the drill box, and then put the drill groove to be installed into the drill box corresponding to the convex point of the drill box core plate. Put the drill into the drill box, and the drill bit will be stuck in the rotary table core. Then screw the drill pipe with the connecting nut of the drill bit in turn. Again, the drill bit is disassembled. Lifting drill pipe (Attached
DrillIt looks small, but its installation and use are still very exquisite. Familiar with it all know. Let's see what it's worth.
First.DrillofInstallation.Slowly lift the drill box, put the four legs of the drill box into the four holes of the drill rotary table, select the corresponding drill box core plate according to the specifications of the drill bit, lift the drill box core plate into the drill box, and then put the drill groove to be installed into the drill box corresponding to the convex point of the drill box core plate. Put the drill into the drill box, and the drill bit will be stuck in the rotary table core. Then screw the drill pipe with the connecting nut of the drill bit in turn.
And then again,Drill Removal.Lift the drill pipe (with drill bit), connect the drill box with the rotary table, lift the drill pipe slowly to make the drill bit groove correspond to the convex point of the drill box core plate, lock the drill bit in the drill box, and remove the drill pipe and drill bit in turn.
This is the installation and removal of the drill.
Key words:
