-
-
-
-
Honor
-
-
-
-
-
Contact
-
Master the correct method of use, improve the efficiency of the use of diamond geological drill bit-beneficial mining technology-drill pipe-geological drill pipe-spiral drill pipe
Release time:
2019-05-23
Author:
Source:
Shandong yi mining drilling technology co., ltd. production of drilling engineering dedicated to all kinds of geological drill pipe, spiral drill pipe, triangular drill pipe, coal drill pipe, drill bit, drill pipe, complete specifications! Strength manufacturers, trustworthy! company set research and development-production-sales-sales as one, welcome customers to purchase, tel: 0635-2311078
Diamond drill bit in the use of improper drilling methods and prone to all kinds of problems, such as diamond drill bit burning drill, stuck drill, rigid body cracking and so on. Mastering the correct use of it can improve the efficiency and service life of diamond geological drill bits.
Correct installation and use of diamond geological drill bit:
(1) Before use
After the new gold drill bit is unsealed, carefully check the appearance of the bit, especially if there is any deformation of the thread. Secondly, check each joint and outer tube of the drilling tool to ensure that each thread connection is clean and free of debris, and the core tube or casing is not severely worn and cracked. After confirming that it is correct, apply lubricating oil to the connection of the drill thread and tighten it.
2, when used
In order to keep the cutting edge of the drill bit always sharp, the matrix hardness of the drill bit and the rock formation should be considered when purchasing the gold drill bit of the gold drill bit factory. Specific matching details can consult the gold drill bit factory. Necessary measures to reduce the wear of drilling tools and bit during the drilling process to ensure the normal circulation of flushing fluid or mud. At the same time, it is not suitable to pressurize the bit too much to cause hard damage to the bit after the bit is drilled normally. The captain should always pay attention to the drilling situation to prevent sundries such as rock from entering the borehole to damage the bit.
3. After use
After the drilling is completed, the drilling tool should be lifted to the ground in time to avoid the problem of sticking. After the completion of the work, in order to ensure the safety of the drill bit, it can be unloaded from the core tube or casing, and properly kept to avoid the thread being stained with debris to affect the next tightening operation. If it is not used for a long time, the drill bit should be cleaned in time and coated with anti-rust oil before packaging.
Although the price of diamond geological drill bit is not as expensive as before, but the correct use and maintenance of it should be used as a daily code of conduct, as far as possible to let each gold drill bit play a hundred percent of the effectiveness, and only the right way to ensure the high efficiency and durability of drilling.
| Shandong Yiguang Drilling and Production Technology Co., Ltd. produces various geological drill pipes for drilling engineering.,auger drill pipe,triangular drill pipe,coal drill pipe,Drill,Drill pipe, etc., complete specifications!Strength manufacturers,Trustworthy!Company set research and development-Production-Sales-After sales as one, welcome customers to purchase, telephone:0635-2311078 |
Key words:
Drill Bits, Drill Pipe, Geological Drill Pipe
