06
2020-03
What are the specifications and models of cross air drill?
Common specifications: φ 30, φ 32, φ 34, φ 36, φ 38, φ 40, φ 42, φ 43, φ 50, φ 55, φ 60, φ 65,φ 70 and etc.
2020-03-06
06
2020-03
What are the connection types of air drill bit?
The common specification of the chisel bit is φ 28 - φ 60, and the connection type is taper connection and R-type thread.
2020-03-06
06
2020-03
What are the uses of cross air drill?
They are suitable for complex rock strata such as drilling tool fracture under the condition of high power drill. Strong radial wear resistance.
2020-03-06
06
2020-03
What are the characteristics of the chisel air bit?
With mature technology, high quality steel and high quality alloy, it has the advantages of high toughness, high wear resistance, high production efficiency and low cost.
2020-03-06
06
2020-03
What is the application scope of the chisel air bit?
It is suitable for light rock drill to drill rock holes with diameter less than 50mm, and it is suitable for rock layers with low hardness. It is widely used in coal mines, iron mines, gold mines, cop
2020-03-06
06
2020-03
What kind of production technology do you use for chisel bit and cross bit? What
Our production specifications are as follows: the production specification of chisel drill bit is φ 28 - φ 60, other specifications can also be customized production, the production specification of c
2020-03-06
06
2020-03
What is the processing technology of the button drill bit? What are the connec...
The button drill bit of our company are divided into two processes: one is welding process, the other is cold pressing process.Compared with the two processes, the product quality of cold pressing pro
2020-03-06
03
2020-03
Maintenance of down-the-hole impactor and drill bit-Yikuang Technology
The advantages of 1. down-the-hole impactor and drill bit in water well construction 1. High drilling efficiency, long drilling tool life, down-the-hole impactor rock drilling, the medium is air, there is no problem of recovery and treatment of flushing medium, and auxiliary time is reduced. 2. The use cost is low. The down-the-hole impactor requires small shaft pressure on the drilling rig, low speed, low torque, low natural power consumption, relatively thin drill pipe diameter, easy installation and disassembly, and long service life. 3, DTH impactor drilling, the hole wall is more complete, no other media pollution, basically can maintain the original formation structure and water permeability, reduce the well cleaning time, save the cost. 4,
2020-03-03
03
2020-03
Treatment Measures of Underground Dust -- YiKuang Science and Technology
According to data from the National Health and Family Planning Commission, in 2017, a total of 27420 cases of occupational diseases were reported nationwide, including 24206 cases of pneumoconiosis. The number of reported cases of pneumoconiosis accounted for 88.28 of the total number of reported cases of occupational diseases in 2017, most of which were distributed in the coal industry. By the end of 2016, the cumulative number of pneumoconiosis reported nationwide has exceeded 700000 cases, accounting for 90% of occupational diseases. Mine dust, as one of the five underground natural disasters, not only endangers the health of workers, but also has the risk of explosion. With the mechanization and automation of coal resources mining is getting higher and higher, the amount of coal dust is also increasing, and the development of coal
2020-03-03