-
-
-
-
Honor
-
-
-
-
-
Contact
-
Maintenance and Maintenance Method of Diamond Composite Piece Bit
Release time:
2019-12-10
Author:
Source:
Diamond drill in the rig and other supporting drilling equipment with the completion of the drilling task, as the only cutting rock drilling accessories, it is a service life, so in each drilling should be timely after the end of its maintenance and maintenance, and this is also related to the service life of the drill bit. Electroplating layer maintenance and maintenance Proper and timely maintenance can also extend the life of electroplated drill bits and can greatly reduce drilling costs. Timely clean the head carcass of the electroplated drill bit, observe whether there is tire falling and rigid body cracking, and the degree of wear of the cross-section diamond. When the drill bit cannot complete drilling and core-carrying work, this is
Diamond drill in the rig and other supporting drilling equipment with the completion of the drilling task, as the only cutting rock drilling accessories, it is a service life, so in each drilling should be timely after the end of its maintenance and maintenance, and this is also related to the service life of the drill bit.
Plating maintenance and maintenance
Proper and timely maintenance can also extend the life of electroplated drill bits and can greatly reduce drilling costs. Timely cleaning plating drill head carcass, observe the existence of the tire and rigid body cracking, as well as the wear degree of section diamond, when the drill can not complete the drilling and core work, this is the drill is the need to replace. If the rigid body and matrix of the electroplated drill bit are intact, but the drilling efficiency is low or slippage occurs, then the 6-8 degree diamond drill bit of the gold drill needs to be replaced, or the matrix raised by the drill bit needs to be artificially edged out to enhance the footage efficiency. In order to ensure that the electroplated drill bit maintains the best footage efficiency every time it is used, it should be cleaned and checked after each use.
Maintenance and maintenance of drill bit
Diamond composite drill bit is also a kind of geological diamond drill bit, which has two kinds of coring and non-coring, but no matter which kind, it needs regular maintenance and maintenance. Check the alloy wear of the drill bit after each drilling. When the outer gauge strip wears more than 2/3, if it continues to be used, it will seriously affect the drilling efficiency and accelerate the wear speed of core pipe and drill pipe, the drill bit should be replaced or the alloy should be re-welded. Check whether the cutting composite sheet of the drill bit head is seriously worn. When the remaining amount is less than 1/5, it cannot be used any more. It needs to be replaced in time or re-deep.
Although the price of diamond bits has been greatly reduced, but drilling cost savings is always the goal that drillers should pursue, the timely maintenance of the drill bit can not only achieve this, but also reduce the probability of drilling accidents.
Key words:
Maintenance, drill bit, drilling, diamond, maintenance, timely, wear, need, replacement
Previous Page
