-
-
-
-
Honor
-
-
-
-
-
Contact
-
The Determinants of Increasing the Hole-forming Speed of Drilling Rig
Release time:
2019-10-21
Author:
Source:
People who are drilling rock drilling projects are looking to buyDrillMachineThe equipment can be used in the problem of hole-forming efficiency and bit speed.enough to achieve the desired effect. That is to say, the faster the hole is, the better, and the drilling requirements can be completed with low energy consumption.
At present, many construction sites are privately contracted, and the price may also be calculated according to the number of holes,Some holes are fixed and some holes are not fixed, so the more holes are drilled, the better the benefit.
In this case, the construction unit in the purchase of drilling rig in addition to a lot of consideration of the price and after-sales service factors.In addition, we should also pay attention to the efficiency of drilling rig construction, that is, a problem of hole-forming speed, and many times can beOn the one hand, the speed at which holes can be formed takes into account the performance of the drilling rig; on the other hand, it is largely limited to the application of the drilling rig.The specific conditions of the construction site, such as the hardness of the rock, etc.; the last aspect to consider is the construction anchor rig.Attention should be paid to the construction method and construction technology in drilling construction, which is also a factor that determines the speed of drilling construction.The problem. First of all, when choosing a drilling rig, we must choose the drilling rig according to the specific construction parameters, and choose the most suitable one.Hehe probably ideal construction efficiency of the drilling rig, this is a basic aspect, there is no choice of the right drilling rig may be behindWork in the effort will not achieve good construction results; another aspect is to understand the specific geological conditions, and then forThe actual situation of a choice of construction technology, the following aspects may affect the construction of the construction speed:
1. It is a question of the angle of construction. A good choice of the angle of construction can well carry out a crushing of rocks, which may involve many performances.There are corresponding principles in the structure, so choosing a good angle for construction according to this situation is the drilling speed.an important factor;
2. Considering the hardness and brittleness of the rock, the harder the rock or the greater the brittleness, the higher the construction speed.A better information, such a rock situation can achieve the construction speed is the most guaranteed;
3. For medium-hard and medium-hard rocks below, the use of high-frequency low-impact impact rock crushing effect is good; for hard and hardThe use of low frequency and high impact energy of the impact of the rock is better.
To sum up, in different construction conditions corresponding to the construction effect is not the same, so according to the specific circumstances of the constructionFirst of all, the selection of drilling rigs, and then the selection and use of construction technology is the guarantee.DrillMachineAn important source of pore-forming velocityBecause.
Key words:
Previous Page
Previous Page:
Next page:
