29

2021-09

Retrofit and Upgrade of Hydraulic Crawler Drilling Rig Directional Drilling Rig (3)-Yikuang Technology

4. transformation directional drilling rig basic conditions 1. Hydraulic crawler drilling rig (ZDY, CMS series torque 3200N.m or more). 2. Drilling depth: ≥ 500m. 3. Coal seam hardness coefficient: coal seams below F6 can be locally penetrated. 4. High gas mines and mines with serious geological disasters. 5. Product Introduction 1. Outer Flat Directional Cable Drill Pipe The outer flat directional cable drill pipe consists of four parts: drill pipe body, conduction device, insulation device and support device. The conduction device, insulation device and support device constitute the central cable device of the drill pipe, which affects the transmission of measurement signals while drilling. 2. Non-magnetic drilling tool Non-magnetic drilling tool

2021-09-29

29

2021-09

Retrofit and Upgrade of Hydraulic Crawler Drilling Rig Directional Drilling Rig (2)-Yiguang Technology

Modification of Directional Drilling Rig Scheme Configuration

2021-09-29

29

2021-09

Retrofit and Upgrade of Hydraulic Crawler Drilling Rig Directional Drilling Rig (1)-Yikuang Technology

With the rapid development of gas extraction technology in the coal industry, as well as the implementation of people-oriented thinking and the proposal of scientific development policy of safety and environmental protection, the harmonious unity of coal mine safety production and comprehensive utilization of energy, coal mine gas extraction work is particularly important. According to the popularization level and technology application maturity of directional drilling rig, combined with the actual situation of the mine, it is completely possible to upgrade the hydraulic crawler drilling rig for general drilling to directional drilling rig and reach the standard of directional drilling rig for construction. On the one hand, this saves the cost of newly purchased equipment, on the other hand, fully according to the mining conditions of the mine to upgrade into a utility model equipment, the most.

2021-09-29

29

2021-09

General drilling to directional drilling-beneficial mining technology

The first type of guide drilling tools commonly used in general drilling to directional drilling and horizontal directional drilling is the dental plate drill bit. There are many names for this kind of drill bit. Foot drill bit, duck palm drill bit and guide plate drill bit all refer to this kind of drill bit. There are different designs for different strata. The plate has both a common type with one bend and an enhanced type with two bends. Generally used for soft to medium hardness and more uniform hardness of clay, or loose to more dense sand. Steering method: when drilling straight holes, the drill pipe is rotated and pushed; when steering adjustment is needed, stop the rotation of the drill pipe, and after the working situation is adjusted to the direction that needs to be adjusted, only push the drill pipe without rotating it.

2021-09-29

27

2021-09

How to purchase geological drill pipe is more suitable? -- Yikuang Science and Technology

If you want to buy a device, you must have a certain understanding of it, otherwise there is no way to determine the purchase directly. Therefore, many people in the purchase of geological drill pipe, at a loss. In fact, it is mainly because many people do not know that there are several types of products and what characteristics they have. In fact, there are three main types of geological drill pipes: First, high-efficiency geological drill pipes. This type of product is usually made with a special drill bit, which is made with high pressure and seamless technology. The internal parts are welded in a unique way. This series of products can usually be in a very good torque state, suitable for various complex construction rings

2021-09-27

27

2021-09

Welding cracks are very difficult to do, these causes and their prevention and control methods are solved at one time.

Welding crack is divided into its essence, can be divided into hot crack, reheat crack, cold crack, lamellar tear and so on. The following only on the causes of various cracks, characteristics and prevention methods for specific elaboration. 1. Hot crack is produced at high temperature during welding, so it is called hot crack, which is characterized by cracking along the original austenite grain boundary. According to the different materials of the welding metal (low alloy high strength steel, stainless steel, cast iron, aluminum alloy and some special metals, etc.), the form, temperature range and main reasons of the hot crack are also different. At present, the thermal crack is divided into three categories: crystallization crack, liquefaction crack and multilateral crack. 1) Crystal crack main

2021-09-27

27

2021-09

Fracturing pump technology

With the continuous strengthening of sand fracturing and acidizing fracturing technology and the increasing depth of oil and gas wells in China, fracturing pumps are developing in the direction of large displacement, high pressure and high power. With the development of oil and gas exploration technology, the distribution of oil and gas wells is becoming more and more extensive, and the requirements for the migration of fracturing equipment will be higher. Therefore, the working condition of the fracturing pump is even worse, in order to further improve the service life of the fracturing pump and carry out structural improvement and overall research on it is of great significance. 1. Domestic fracturing pump technology research status due to China's economy relative to those western developed countries still have a certain gap, generally still in imitation and

2021-09-27

27

2021-09

Short Board and Solution for Manufacturing Diamond Bit -- Yikuang Technology

In order to overcome the "short board" of diamond drill bit manufacturing hot press sintering, to play the strengths of cold press impregnation, and to use the advantages of microwave sintering, innovative technologies can be produced. Although cold press sintering drill and microwave heating technology are not new technologies, they have been developed for many years. However, the use of high pressure molding in cold press impregnation drill instead of low pressure sintering in hot press sintering can greatly improve the sintering pressure; the use of microwave sintering instead of the current use of intermediate frequency sintering can improve the shortcomings of hot press sintering. Combining these two technologies is an innovation that will play an important role in improving the performance of diamond drill bits and improving the economic indicators of drilling technology.

2021-09-27

22

2021-09

How to carry out daily maintenance of diamond drill bits

Diamond drill bit is suitable for coal mining, geological exploration work and various engineering drilling, but the problem of various technicians is how to carry out daily maintenance. For diamond compact drill bit, today we should explain how to carry out the daily maintenance of diamond drill bit according to the requirements of diamond drill bit users. The more valuable part of a diamond bit is the cutting teeth of its working face. Since the cutting teeth in diamond drill bits are polycrystalline diamond compacts, they are sintered by diamond at high temperature and high pressure, so the diamond compacts are hard but brittle. Therefore, the diamond composite bit is one of the expensive wearing parts in underground engineering and geological exploration. This is going

2021-09-22

< 1...272829...89 >

Copyright©2024 Shandong Yikuang Drilling Technology Co., Ltd.

Business License

Powered by:300.cn | SEO Tags